by Julie Cabrera | Sep 5, 2019 | Studies |
A publication of CR Foundation® Printed September 2019, with permission, from Vol. 12 Issue 9, Page 8 Gordon’s Clinical Evaluation: CR tested carbide 330 and diamond round-end taper coarse instruments because of their popularity. Both performed comparable to premium...
by Julie Cabrera | Jun 3, 2019 | Studies |
Cutting Performance Comparison of FG 330 EdgeDental Carbide Burs Biomaterials Research Report Matt Cowen, B.S. DENTAL ADVISOR Biomaterials Research Center Introduction: This study compares the cutting efficiency and durability of FG 330 Carbide Burs and...
by Julie Cabrera | May 16, 2019 | Studies |
Cyclic Fatigue and Torsional Failure of EdgeTaper Platinum Endodontic Files at Simulated Body Temperature Ahmed Jamleh, BDS, MSc, PhD, Amjad Alghaihab, DMD, Abdulmohsen Alfadley, BDS, MSc, FRCD(C), Hussam Alfawaz, BDS, MS, Abdullah Alqedairi, BDS, MS, and...
by Julie Cabrera | Mar 4, 2019 | Studies |
Results: Values are considered approximate (~) when plate counts were outside of the statistically accurate range of 25-250 colony forming units (CFU)/plate for bacteria and yeast and 8-80 CFU/plate for mold. Less than symbols(<) are applied to recovery values...
by Julie Cabrera | Feb 7, 2019 | Studies |
Highlights •Cyclic resistance, torsional resistance, and bending stiffness of glide path files made of different alloys were compared using custom devices. •EdgeGlidePath made from heat-treated wire showed higher cyclic resistance than ProGlider and One G. •One G made...
