Research Studies | EdgeEndo

Micro–computed Tomographic Evaluation of the Shaping Ability of WaveOne Gold, TRUShape, EdgeCoil, and XP-3D Shaper Endodontic Files in Single, Oval-shaped Canals: An In Vitro Study

Abstract Introduction This study evaluated and compared the shaping ability of the WaveOne Gold (Dentsply/Tulsa Dental Specialties, Tulsa, OK), TRUShape 3D Conforming File (Dentsply/Tulsa Dental Specialties), EdgeCoil (EdgeEndo, Albuquerque, NM), and XP-3D...

Carbide Burs Evaluation

A publication of CR Foundation® Printed September 2019, with permission, from Vol. 12 Issue 10, Pages 1-2 Gordon’s Clinical Observations: Low-cost diamond rotary instruments have long been accepted as similar in performance to diamond instruments that cost ten...

Differences in cyclic fatigue lifespan: WaveOne Gold vs EdgeOne Fire.

Differences in cyclic fatigue lifespan: WaveOne Gold vs EdgeOne Fire. Gambarini G, Galli M, Di Nardo D, Seracchiani M, Donfrancesco O, Testarelli L. J Clin Exp Dent. 2019 July 1;11(7):e609-e613.* Article Number: 55839* Publication Types: research-article* Article...

Cost Effective Rotary Instruments that were Well Received in Clinical Use Evaluation

A publication of CR Foundation® Printed September 2019, with permission, from Vol. 12 Issue 9, Page 8 Gordon’s Clinical Evaluation: CR tested carbide 330 and diamond round-end taper coarse instruments because of their popularity. Both performed comparable to premium...

FG 330 Carbide Bur Study

Cutting Performance Comparison of FG 330 EdgeDental Carbide Burs Biomaterials Research Report Matt Cowen, B.S. DENTAL ADVISOR Biomaterials Research Center Introduction: This study compares the cutting efficiency and durability of FG 330 Carbide Burs and...

EdgeTaper Platinum™ Vs. ProTaper Gold®

Cyclic Fatigue and Torsional Failure of EdgeTaper Platinum Endodontic Files at Simulated Body Temperature Ahmed Jamleh, BDS, MSc, PhD, Amjad Alghaihab, DMD, Abdulmohsen Alfadley, BDS, MSc, FRCD(C), Hussam Alfawaz, BDS, MS, Abdullah Alqedairi, BDS, MS, and...

Time Kill Study

Results: Values are considered approximate (~) when plate counts were outside of the statistically accurate range of 25-250 colony forming units (CFU)/plate for bacteria and yeast and 8-80 CFU/plate for mold. Less than symbols(<) are applied to recovery values...

EdgeMix vs QMix

Results: The spectra shown in Figure 1 shows that sodium hypochlorite (blue line) has an absence of absorbance past 400 nm in wavelength. The same observation is made when EdgeMix was mixed with sodium hypochlorite (green line). Furthermore, since the absorbance...

Mechanical Properties of Various Glide Path Instruments

Highlights •Cyclic resistance, torsional resistance, and bending stiffness of glide path files made of different alloys were compared using custom devices. •EdgeGlidePath made from heat-treated wire showed higher cyclic resistance than ProGlider and One G. •One G made...